Husqvarna PA 1100 Saw User Manual


 
English
– 9
SAFETY INSTRUCTIONS
Personal protection
Always wear boots and other equipment described under
the heading Personal protective equipment in the
machine’s Operator’s Manual.
Always wear working clothes and heavy-duty long
trousers.
Never wear loose clothing or jewellery.
Make sure your hair does not hang below shoulder level.
Safety instructions regarding the
surroundings
Never allow children to use the machine.
Ensure that no-one comes closer than 15 m while you are
working.
Never allow anyone else to use the machine without first
ensuring that they have understood the contents of the
operator’s manual.
Never work from a ladder, stool or any other raised
position that is not fully secured.
Safety instructions while working
Always ensure you have a safe and stable working
position.
Always use both hands to hold the machine. Hold the
machine at the side of your body.
Use your right hand to control the throttle setting.
Make sure that your hands and feet do not come near the
cutting attachment when the engine is running.
When the engine is switched off, keep your hands and feet
away from the cutting attachment until it has stopped
completely.
Watch out for stumps of branches that can be thrown out
during cutting.
Always lay the machine on the ground when you are not
using it.
Check the working area for foreign objects such as
electricity cables, insects and animals, etc, or other
objects that could damage the cutting attachment, such
as metal items.
If any foreign object is hit or if vibrations occur stop the
machine immediately. Disconnect the HT lead from the
spark plug. Check that the machine is not damaged.
Repair any damage.
If anything gets caught up in the cutting attachment while
you are working, switch off the engine and let it stop
completely before cleaning the cutting attachment.
Safety instructions after completing work
The transport guard should always be fitted to the cutting
attachment when the machine is not in use.
Make sure the cutting attachment has stopped before
cleaning, carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
Always wear heavy-duty gloves when repairing the cutting
attachment. This is extremely sharp and can easily cause
cuts.
Store the machine out of reach of children.
Use only original spare parts for repairs.
Basic working techniques
Hold the machine as close to your body as possible to get
the best balance.
Make sure that the tip does not touch the ground.
Do not rush the work, but work steadily until all the
branches have been cut back cleanly.