Filter
Top Products
DS3000 Storage Manager Software Demo Guide - 12 -
Step 1. Locate the Disk System
This optional step helps locate the subsystem if it’s in a data center or room with other systems. Click on
Locate the Storage Subsystem, which will take you to the following screen:
From this screen, select an item and click on Locate to have the lights on the DS3000 disk system
indicate its location. This allows you to locate the physical location of the disk system in your network.
The disk system can then be identified with a label.
Step 2. Rename the Storage Subsystem
This optional step allows you to rename the subsystem. Click on Rename the Storage Subsystem,
which will take you to the following screen.
Enter the new subsystem name and click OK.