Filter
Top Products
DS3000 Storage Manager Software Demo Guide - 14 -
After selecting the appropriate host, click Add and then OK. You will then receive confirmation of host
access.
__________________________________________________________________________________
Note: In the Demo, several hosts have been pre-configured for access.
__________________________________________________________________________________
Step 5. Configuration Storage Subsystem
This step has multiple options. The Automatic (Simple) option is the quickest and easiest, but provides
the least amount of control over the configuration. The Manual (Advanced) option, which still provides
some automated assistance, provides more control over the configuration and will be preferred in nearly
every situation. This scenario will cover the automatic option. The Manual (Advanced) option, Create
Logical Drives, will be covered in Scenario 2.
Automatic (Simple)
Expand the Automatic (Simple) option under Configure the Storage Subsystem and select Step 1:
Automatic Configuration. This will bring you to the Automatic Configuration window where you will
simply choose a RAID level and click Finish. Storage Manager will then configure the entire subsystem
into multiple arrays based on the selected RAID level and create a single logical drive within each array.
________________________________________________________________________________
Note: Users that wish to define the number of drives in each array, and the number and size of the
logical drives in each array, should use the “Create Logical Drives” option.
________________________________________________________________________________