Filter
Top Products
EN-5 04581922_ed4
EN
SECTION 2 - CONTROLS
CONTROLS & CONNECTORS
COMBINED PORT
(PRINTER, SERIAL & CHARGER)
BATTERY COMPARTMENT / HANDLE
END CAP
(Battery Access)
LED’s
FITTING FOR
STURTEVANT RICHMONT®
DRIVE ADAPTERS
LCD DISPLAY PANEL
CONTROL PANEL
A short single press is sucient to operate the keys.
A click will be heard when the arrow keys are operated.
keys are used to navigate through the menus on the same
level.
Pressing ENTER on a displayed menu function will take you
into the relevant menus for that function.
Pressing ESCAPE will take you up a level back towards the
main menu.
If you keep pressing the keys you will go through all the
menus on that level and will return to where you started. When
you choose a menu item, the Expert Torque Wrench will remember
what sub-menu item you chose last time.
REMOVING AND ATTACHING THE DRIVE ADAPTERS
Sturtevant Richmont® Head
To remove a drive adapter, insert a small screwdriver into the
access hole as shown, depress the small locking pin and slide the
adapter to the side - see below.
To attach a drive adapter, depress the locking pin and slide the
adapter into place until it locates with a click.
ENTER KEY (green)
Used for conrming a selection or accepting an option etc. Similar
to the Return key on a computer.
ESCAPE KEY (red)
Used for canceling an option.
UP/DOWN ARROW KEYS
Used to toggle between screens and options (small arrows on right
of screen show direction(s) available).
LEFT RIGHT ARROW KEYS
Used to select dierent elds or options.
All the functionality of the wrench is accessed through a simple
menu structure with the aid of the 4 arrow keys, the ENTER Key
(Green) and the ESCAPE Key (Red).
INSERT SMALL
SCREWDRIVER
TO DEPERSS
PIN
SLIDE FITTING
TO REMOVE
CONTROL PANEL
Note: Icons which appear here can be
highlighted using the keys
activated by pressing ENTER.
ESCAPE
ENTERCURSOR KEYS