Filter
Top Products
2
Using the Tool (Continued)
• Power tools can vibrate in use. Vibration, repetitive
motions or uncomfortable positions may be harmful to
your hands and arms. Stop using any tool if discomfort,
tingling feeling or pain occurs. Seek medical advice before
resuming use.
• Keep body stance balanced and firm. Do not overreach
when operating this tool. Anticipate and be alert for sud-
den changes in motion, reaction torques, or forces during
start up and operation.
• Tool and/or accessories may briefly continue their motion
after throttle is released.
• To avoid accidental starting - ensure tool is in “off” posi-
tion before applying air pressure, avoid throttle when car-
rying, and release throttle with loss of air.
• Do not carry or drag the tool by the hose.
• Do not use power tools when tired, or under the influence
of medication, drugs, or alcohol.
• Never use a damaged or malfunctioning tool or accessory.
• Do not modify the tool, safety devices, or accessories.
• Do not use this tool for purposes other than those recom-
mended.
• Use accessories recommended by Ingersoll-Rand.
• Do not use a quick disconnect coupling unless it is sepa-
rated from the tool by a whip hose. Attach whip hose to
tool using heavy duty, thick walled fitting.
• The inserted tool may break in use. Keep clear and main-
tain a balanced and firm stance.
• Always use appropriate retainer, latch or sleeve, in addi-
tion to proper barriers to protect persons in surrounding
or lower areas from possible ejected accessories.
• Never operate a Percussion Tool unless an accessory is
properly installed and the tool is held firmly against the
work.
• Attach safety cables across hose couplings and fittings and
install safety locking pins or clips on coupling to prevent
whipping air hoses.
• Only operate the throttle mechanism by hand. Keep hands
away from the throttle mechanism until it is time to oper-
ate the tool.
• Never rest the tool or chisel on your foot.
• Never point the tool at anyone.
• Do not touch the accessory or tool parts close to the acces-
sory immediately after operation. They may be hot and a
burn may result.
• Hold the tool firmly in both hands.
The use of other than genuine Ingersoll-Rand replacement parts may result in safety hazards, decreased tool
performance, and increased maintenance, and may invalidate all warranties.
Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll-Rand Authorized
Servicenter.
WARNING SYMBOL IDENTIFICATION
WARNING
Always wear eye protection
when operating or performing
maintenance on this tool.
WARNING
Read this manual before
operating tool.
WARNING
Always wear hearing
protectionwhen operating
this tool.
Indicates compliance with
relevant CE directives.
European Community Mark
Sound Power Level