Filter
Top Products
it WARNING
.
Read and understand the entire
instruction manual before attempting
assembly or operation.
This bandsaw is designed and intended
for use by properly trained and
experienced personnel only. If you are
not familiar with the proper and safe
operation of a bandsaw, do not use until
proper training and knowledge nave
been obtained.
.
.
Make certain the machine is properly
grounded.
.
Before operating the machine, remove tie,
rings, watches, otherjewelry, and roll up
sleeves above the elbows. Remove all
loose clothing and confine long hair. Do
not wear gloves.
.
Keep the floor around the machine clean
and free of scrap material, oil and grease.
.
Keep machine guards in place at all times
when the machine is in use. If removedfor
maintenance purposes, use extreme
caution and replace the guards
immediately.
.
Do not over reach. Maintain a balanced
stance at all times so that you do not fall or
lean against blades or other moving parts.
.
Make all machine adjustments or
maintenance with the machine unplugged
from the power source.
.
Use.theright tool. Don't force a tool or
attachment to do a job which it was not
designed for.
.
Replace warning labels if they become
obscured or removed.
.
Make certain the motor switch is in the off
position before connecting the machine to
the power supply.
.
Give your work undivided attention.
Looking around, carrying on a
conversation, and "horse-play" are careless
acts that can result in serious injury.
.
Keep visitors a safe distance from the work
area.
.
Use recommendedaccessories; improper
accessories may be hazardous.
.
Make a habit of checking to see that keys
and adjustingwrenches are removed
beforeturning on the machine.
.
Always keep hands and fingers away from
the blade when the machine is running.
.
Never holdthe material with the saw in the
horizontal position. Always use the vise
and clamp it securely.
.
Readand understandwarnings posted on
the machine.
.
Keep the belt guard and wheel covers in
place and in working order.
.
Always provide adequate support for long
and heavy material.
.
Use a sharp blade and keep machine clean
for best and safest performance.
.
Failure to comply with all of these warnings
may cause serious injury.
.
WARNING: Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known to cause cancer, birth defects or other
reproductive harm.
Some examples of these chemicals are:
. Lead from lead based paint
. crystalline silica from bricks and cement
and other masonry products, and
. arsenic and chromium from chemically-
treated lumber.
.
Your risk from those exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specifically
designed to filter out microscopic particles