Filter
Top Products
Kramer Electronics Ltd.
14
9.2 Black Burst/Bar Generator Connections
Figure 9 describes typical usage of a Black Burst/Bar Generator, where the SG-6003B functions as a test
and alignment tool for the audio and video acceptors and can provide black or color reference bar for
cameras that need a stable reference. A Subcarrier signal is also provided to a Chroma Keyer/Mixer for
special effects operation.
Perform the following steps (as necessary):
1) Connect an audio acceptor to the
1 kHz Out RCA
connectors of the SG-6003B.
2) Connect the
BNC Black Burst Outputs
connectors of the SG-6003B to genlockable
acceptors/sources.
3) Connect the
BAR
BNC connector to a video monitor.
4) Connect the
SC Out
BNC connector to a Chroma Keyer/Mixer.
5) Operate sources/acceptors, mixer and the SG-6003B.
Figure 9: Black Burst/Bar Generator Connections
9.3 Restoring Black Burst and Image Stability
Figure 10 illustrates typical usage of a Kramer
Sync processor
(SG-9 in this case): an unstable video signal,
coming from a video source is connected to the SG-9, in order to restore the bad image. A video acceptor
is connected to the SG-9 output and receives the restored image.
Perform the following steps (as necessary):
1) Connect the output from your video source to the
VIDEO IN
BNC connector of the SG-9.
2) Connect the
VIDEO OUT
connector of the SG-9 to an appropriate acceptor.
3) Operate sources/acceptors and the SG-9.