Filter
Top Products
Kramer Electronics Ltd.
7
5 SYNC PROCESSORS
This section describes all the controls and connections of your machine. Understanding the controls and
connections helps you realize the full power of your machine.
5.1 Getting to Know Your SG-6N Sync Stabilizer
The KRAMER
SG-6N
Video Sync Stabilizer replaces corrupted or missing horizontal and Vertical sync
information from a video signal, especially from high generation tapes carrying time-code or teletext
information which upset image stability, with standard synchronization signals. In many cases the
KRAMER
SG-6N
can replace or enhance a TBC operation. The
SG-6N
restores standard sync and
blanking information, eliminating instability of the video signal. The
SG-6N
operates in PAL and NTSC,
and a rear panel mounted switch selects operation mode. The machine uses 12VDC for power supply and
is therefore suitable for fieldwork as well.
Front/Rear panel features of the
SG-6N
are described in Figure 3 and Table 2.
NOTE
For operation instructions refer to section 9.
Figure 3: SG-6N Front/Rear Panel Features
Table 2: SG-6N Front/Rear Panel Features
No. Feature Function
1. Power Switch Illuminated switch: Supplies power to the unit.
2.
CV IN
BNC connector Composite video input.
3. Switch Selects either
NTSC
or
PAL
mode (pressed = NTSC)
.
4.
CV OUT
BNC connector Restored composite video output.
5.
12VDC
feed connector A DC connector that allows power to be supplied to the unit.