Filter
Top Products
D
GB
F
I
E
P
NL
CN
7
Leica DISTO™ D8 LCA782205a gb
Menu functions
Press the key briefly to enter the submenu of the selected main
menu item.
By pressing the or keys you can make the alterations in the
submenu.
Press and hold the key to accept the settings.
Pressing the button for longer in the menu allows you to quit the
settings function without saving.
Setting the unit for distance measurements
The following units can be set:
Setting the unit for tilt measurements
The following units can be set for tilt measurements:
Display illumination ( )
The brightness of the display has six levels of adjustment. Step 6 is the
brightest and step 1 is the darkest setting.
Long range Mode ( )
Unfavourable conditions (strong sunlight or a very weak reflective target
surface) may reduce the range of the device, in spite of this the long range
mode allows you to take measurements over longer distances. The use of
a tripod and measurement initiation by pressing the key are recom-
mended when measurements over 30m are made over longer time periods
in these conditions. (For details see Technical specifications)
)
The settings are reset when the device is switched off.
Measuring with the tripod ( )
The reference point may be adjusted to the tripod mount if the user
requires a measurement from the actual mounting grommit versus the
front or back of the DISTO™. To do this select the symbol in this
menu item. You can switch the reference on the tripod on or off. The
setting can be seen on the display .
)
We recommend that measurements are initiated using the key
when using the device on a tripod in order to prevent loss of sharpness.
)
The settings are reset when the device is switched off.
Beep ( )
You can switch the beep on or off.
Distance Area Volume
1.1 0.0000 m
0.000 m² 0.000 m³
1.2 0.000 m
0.000 m² 0.000 m³
1.3 0.00 m
0.000 m² 0.000 m³
1.4 0.00 ft
0.00 ft² 0.00 ft³
1.5 0'00''
1
/
32
0.00 ft² 0.00 ft³
1.6 0.0 in
0.00 ft² 0.00 ft³
1.7 0
1
/
32
in
0.00 ft² 0.00 ft³
1.8 0.000 yd
0.000 yd² 0.000 yd³
Units for tilt
2.1 ± 90.0°
2.2 ± 180.0°
2.3 360.0°
2.4 0.00 %
2.5 0.0 mm/m
2.6 0.00 in/ft