Filter
Top Products
D
GB
F
I
E
P
NL
CN
11
Leica DISTO™ D8 LCA782205a gb
Functions
Volume
Press this button twice. The symbol appears in the display.
Press this button to take the first length measurement (e.g.
length).
Press this button to take the second length measurement (e.g.
width).
Press this button to take the third length measurement (e.g.
height).
The result is shown in the summary row.
Press and hold the button to display additional room information
such as ceiling/floor area , surface area of the walls , circumfe-
rence .
Trapezium measurement 1
See drawing {J}
Press the key once. The symbol is displayed.
Press the key and take the first length measurement
(e.g. height 1).
Press the key again and take the second length measurement
(e.g. width)
Press the key and take the third length measurement
(e.g. height 2).
The result is shown in the summary row.
Press and hold the key to display additional information about the
trapezium measurement, for example inclination angle , trapezium
area .
Trapezium measurement 2
See drawing {K}.
Press the key twice. This symbol is displayed.
Press the key and take the first length measurement .
Press the key and take the second length measurement and
inclination angle measurement.
The result is shown in the summary row.
Press and hold the key to display additional information about the
trapezium measurement, for example inclination angle , trapezium
area .
Triangular area
The area of a triangle can be calculated by the measurement of three sides.
See drawing {N}.
Press the key once - the triangle symbol appears in the display.
Press the key and measure the first side of the triangle .
Press the key and measure the second side of the triangle .
Press the key and measure the third side of the triangle .
The result is shown in the summary row.
Press and hold the key to display additional information about the
measurement, such as the angle included by the first two measu-
rements and the perimeter of the triangle.