Filter
Top Products
D
GB
F
I
E
P
NL
CN
15
Leica DISTO™ D8 LCA782205a gb
Working with BLUETOOTH®
)
If the tripod and the instrument are moved, always restart the func-
tion and measure the height reference point again before continuing to
measure!
Storage of constants / historical storage
Storage of a constant
You can store and recall a frequently used value e.g. height of a room.
Measure the desired distance, press and hold the button until the
device beeps to confirm storage.
Recalling the constant
Press this button once to recall the constant and then press the
button to enter it into your calculation.
Historical storage
Press this button twice and the previous 30 results (measurements
or calculated results) are shown in reverse order.
The and buttons can be used for navigation.
Press this button to use a result from the summary line for further
calculations.
Pressing the and buttons at the same time erases all the values
in historical storage.
Timer (self-triggering)
Press this button to set a 5-second time delay
or
Press and hold down this button until the desired time delay is
reached (max. 60 seconds).
Once the key is released with the laser activated, the remaining seconds
until measurement (e.g. 59, 58, 57...) are displayed in a countdown. The last
5 seconds are counted down with a beep. After the last beep the measu-
rement is taken and the value is displayed.
)
The timer can be used for all measurements.
Working with BLUETOOTH®
Switching on BLUETOOTH® / sending measu-
rements
A quick press on the - key starts DISTO™ BLUETOOTH®. The data
connection must then be established out from a Pocket PC / PC by the
application software. A grey - icon will appear in the display until this
has been successfully completed. BLUETOOTH® automatically switches
off if the connection to the Pocket PC / PC is not established within 240
sec from when the BLUETOOTH® was switched on.
)
Whilst the first connection between the Pocket PC/PC and the
DISTO™ is being established, a prompt for the Pin-code of the DISTO™
may be displayed. In this case, enter the code 0000 into your Pocket PC/
PC.
Switching off BLUETOOTH®
BLUETOOTH® switches off as soon as the DISTO™ is switched off.
The direction keys
Eight direction keys (identified by a small arrow near the key) on the
operator's keypad are used to manoeuvre the cursor. The direction keys
become active when you switch to the second level (by pressing the