Filter
Top Products
PC Configuration
47
Macintosh Clients
From your Macintosh, you can access the Internet via the LevelOne Broadband Router. The
procedure is as follows.
1. Open the TCP/IP Control Panel.
2. Select Ethernet from the Connect via pop-up menu.
3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can
be left blank.
4. Close the TCP/IP panel, saving your settings.
Note:
If using manually assigned IP addresses instead of DHCP, the required changes are:
• Set the Router Address field to the LevelOne Broadband Router's IP Address.
• Ensure your DNS settings are correct.