Filter
Top Products
Vantage 500 CUMMINS
F-14 DIAGRAMS F-14
DIMENSION PRINT
TRAILER MOUNTING HOLE LOCATIONS.
*
28.99
19.63
6.55
23.69
50.38
54.44
14.63
37.30
45.38
63.10 6.56
42.00
50.81
16.85
33.53
32.08
42.35
31.50
45.67
2.24
50.15
5.86
46.35
*
*
*
*
BOTTOM VIEW OF WELDER BASE.
N.A. CENTER OF GRAVITY WITH OIL IN ENGINE, EMPTY FUEL TANK AND COOLANT IN RADIATOR.
N.A.
M18962-3
ENGINEERING CONTROLLED
MANUFACTURER:
No
A. 02
Revised overall height dimension.
CHANGE DETAIL:
6.53
24.97
NOTE: This diagram is for reference only. It may not be accurate for all machines covered by this manual. The specific diagram for a particular code is pasted inside the machine on one of the enclosure
panels. If the diagram is illegible, write to the Service Department for a replacement. Give the equipment code number.
Ref.