Filter
Top Products
C-1
ACCESSORIES
C-1
RANGER 3 PHASE
OPTIONAL EQUIPMENT (Field Installed)
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR
SMALL WELDERS - For road, off-road and in-plant
and yard towing. (For highway use, consult applicable
federal, state and local laws regarding requirements
for brakes, lights, fenders, etc.)
Order K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
K889-2 & -3 Two-Wheel Undercarriage - For moving
by hand. Overall Width 29 in (.74m) Both have pneu-
matic tires. Puncture proof tires included with K889-3.
K1631-1 Puncture Proof Wheel Kit - For converting
K889-2 or K933-1 to puncture proof pneumatic tires.
K893-1 Caster for Undercarriage - Mounts to the
front of the K889-2 or 3 to allow easy movement on
smooth surfaces. Includes 6” diameter hard rubber
wheel and convenient toe-on, toe-off locking brake.
K933-1 Four Wheel Undercarriage - For Hand
Moving. Rear pneumatic tires, front molded wheels.
K934-1 Cylinder Brackets -
For use with K933-1.
For
transporting one welding gas cylinder.
K1737-1 FOUR WHEEL ALL-TERRAIN UNDER-
CARRIAGE - For moving by hand at construction
sites. Heavy duty puncture resistant pneumatic tires.
K1770-1 UNDERCARRIAGE (FACTORY) - For mov-
ing by hand on a smooth surface. One or two gas
cylinders can be mounted on the rear of the undercar-
riage with the installation of K1745-1 Cylinder
Holder(s). Heavy duty puncture resistant pneumatic
tires and front caster.
K1745-1 GAS CYLINDER HOLDER
Holds Welding Gas Cylinder for use on K1770-1
Undercarriage. One or two may be installed on an
undercarriage.
K1788-1 ROLL CAGE - Gives added damage protection.
Attaches to K1737-1, K1770-1, and K957-1.
K886-1 Canvas Cover -To protect the RANGER 3
PHASE when not in use. Made from attractive red
canvas material which is flame retardant, mildew
resistant, and water repellent.
K802-R Power Plug Kit- provides four 120V plugs
rated at 15 amps each and one dual voltage, Full
KVA plug rated at 120/240V, 50 amps.
K802-N Power Plug Kit - Provides four 120V plugs
rated at 20 amps each and one dual voltage, full KVA
plug rated at 120/240V, 50 amps.
K704 Accessory Kit - Includes 35 ft (10.7m) 2/0 AWG elec-
trode cable, 30 ft. (9.1m) 2/0 AWG work cable, headshield
Filterplate, work clamp and electrode holder. 450 Amp.
Capacity.
K894-1 Spark Arrester Kit - Includes a heavy gauge steel,
approved spark arrester and clamp for easy mounting to
muffler exhaust pipe.
K1816-1 FULL KVA ADAPTER KIT - Plugs into the
120/240V NEMA 14-50R receptacle on the case front
(which accepts 4-prong plugs) and converts it to a NEMA 6-
50R receptacle, (which accepts 3-prong plugs.)
T12153-9 Full-KVA Power Plug - One dual voltage plug
rated at 120/240V, 50 amps.
K930-2 TIG Module - Provides high frequency and shield-
ing gas control.for AC and DC GTAW (TIG) welding applica-
tions. Its compact case is designed foe easy carrying, com-
plete with a handle. High frequency bypass is built in
Requires K938-1 Contactor Kit, K936-4 Control Cable, and
K814 Arc Start Switch.
K938-1 Contactor Kit - For use with TIG Module, Provides a
“cold” electrode until the triggering device (Arc Start Switch)
is pressed.
K936-4 Control Cable - Connects TIG Module to RANGER
3 PHASE. (9 Pin to 115V Plug)
K814 Arc Start Switch - Attaches to the TIG torch for conve-
nient finger control.
K937-45 Control Cable Extension - Allows TIG Module to be
operated at distances up to 200ft. from the power source.
Available in 45ft. (13.7m) Sections.
K844-1 Water Valve Kit - For use with water cooled TIG
torch, Installs inside of TIG Module.
K939-1 Docking Kit - For Mounting the K930-2 TIG Module
on top of the RANGER 3 PHASE.
K875 Accessory Kit - Includes 20 ft (6.1m) #6 electrode
cable, headshield, filter plate, work clamp , electrode holder
and sample packof mild steel electrodes 2w Amp. Capacity.
lug, 15ft. (4.6) #6 work cable