Lincoln Electric 11079 Welder User Manual


 
A-1
INSTALLATION
RANGER 3 PHASE
A-1
TECHNICAL SPECIFICATIONS - RANGER 3 PHASE (K2337-1)
INPUT - GASOLINE ENGINE
RATED OUTPUT @ 104°F (40°C)- WELDER
HEIGHT WIDTH DEPTH WEIGHT
30.3 in. 19.1 in. 42.0 in. 538 lbs. (244kg)
770 mm 485 mm 1067 mm
RATED OUTPUT @ 104°F (40°C)- GENERATOR
Welding Output
AC Constant Current 225A / 25V / 100%
DC Constant Current 210A / 25V / 100%
DC Constant Voltage 200A / 20V / 100%
Auxiliary Power
1
11,500 Watts Peak,10,500 Watts Continuous, 3 Phase 60 Hz AC,480V
10,500 Watts Peak, 9500 Watts Continuous, Single Phase 60 Hz AC,120V/240V
PHYSICAL DIMENSIONS
Make/Model
(K2337-1)
Kohler
CH20S
Description
2 cylinder
4 Cycle
Air-Cooled
Gasoline
Engine.
Aluminum Alloy
with Cast Iron
Liners,
Electronic
Ignition
Operating
Speed (RPM)
High Idle 3700
Full Load 3500
Low Idle 2200
Displacement
cu. in.
(cu.cm.)
38(624)
Kohler
Capacities
Fuel:
9 Gal (34 L)
Lubricating Oil:
2.0 Qts. (1.9 L)
Horsepower
20 HP @
3600 RPM
(Kohler)
Starting
System
12VDC
Battery
Electric Start
Group 58
Battery
(435 cold
Cranking
Amps)
1. Output rating in watts is equivalent to volt - amperes at unity factor.Output voltage is within +/-10% at all loads up to rated capacity.
When welding available auxiliary power will be reduced.