Lincoln Electric 305G Welder User Manual


 
C-1
ACCESSORIES
C-1
OPTIONS/ACCESSORIES AND COM-
PATIBLE LINCOLN EQUIPMENT
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR
SMALL WELDERS
For road, off-road and in-plant and yard towing.
(For highway use, consult applicable federal, state and
local laws regarding requirements for brakes, lights,
fenders, etc.). Order:
K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
K1737-1 FOUR WHEEL ALL-TERRAIN UNDERCAR-
RIAGE For moving by hand at construction sites.
Heavy duty puncture resistant pneumatic tires.
K1770-1 UNDERCARRIAGE (FACTORY)
For moving by hand on a smooth surface.
Heavy duty puncture resistant pneumatic tires & front
caster, One or two gas cylinders can be mounted on
the rear of the undercarriage with the installation of
K1745-1 Cylinder Holder(s).
K1739-1 CABLE CARRIER KIT
For use on K1737-1 and K1770-1 Undercarriages.
K1745-1 WELDING GAS CYLINDER LPG TANK
HOLDER
For use on K1770-1 Undercarriage. One or two may be
installed on an undercarriage.
K1788-1 ROLL CAGE - Gives added damage protection.
K886-2 CANVAS COVER - Protects machine when not in use.
K1898-1 SPARK ARRESTOR
Mounts inside exhaust pipe.
K704 ACCESSORY SET - Includes 35 ft. (10m) of
electrode cable and 30 ft. (9.1m) of work cable, head-
shield, work clamp electrode holder. Cables are rated
at 400 amps, 100% duty cycle.
K857 25 ft (7.5m) or K857-1 100 ft. (30.4m) REMOTE
CONTROL
Portable control provides same dial range as the output
control on the welder. Has a convenient 6 pin plug for
easy connection to the welder.
K1690-1 GFCI RECEPTACLE KIT
Includes one UL approved 120V ground fault circuit
interrupter duplex type receptacle with cover and
installation instructions. Replaces the factory installed
120V duplex receptacle. Each receptacle of the GFCI
Duplex is rated at 20 Amps, the maximum total cur-
rent from the GFCI Duplex is limited to the 20 Amps.
Two kits are required.
K802N POWER PLUG KIT
Provides four 120 volt plugs rated at 20 amps each
and one dual voltage, full KVA plug rated at 120/240
volts, 50 amps.
K802R POWER PLUG KIT
Provides four 120 volt plugs rated at 15 amps each
and one dual voltage, full KVA plug rated at 120/240
volts, 50 amps.
T12153-9 50 AMP, 120/240 V POWER PLUG
K1816-1 FULL KVA ADAPTER KIT
Plugs into the 120/240V NEMA 14-50R receptacle on
the case front (which accepts 4-prong plugs) and
converts it to a NEMA 6-50R receptacle, (which
accepts 3-prong plugs.)
TIG Welding
K1783-9 TIG Torch PTA-26V (25ft.)
K963-3 Hand Amptrol
K870 Foot Amptrol
KP509 Magnum Parts Kit
Spool Gun
K487-25 Magnum Spool Gun
K488 Magnum Control Module
K691-10 Input Cable)
RANGER 305G