Lincoln Electric IM10019 Welder User Manual


 
D-5
MAINTENANCE
D-5
PREVENTING BATTERY BUCKLING
Tighten nuts on battery clamp until snug.
CHARGING THE BATTERY
When you charge, jump, replace, or otherwise connect bat-
tery cables to the battery, be sure the polarity is correct.
Improper polarity can damage the charging circuit. The
Vantage positive (+) battery terminal has a red terminal
cover.
If you need to charge the battery with an external charger,
disconnect the negative cable first, then the positive cable
before you attach the charger leads. After the battery is
charged, reconnect the positive battery cable first and the
negative cable last. Failure to do so can result in damage to
the internal charger components.
Follow the instructions of the battery charger manufacturer
for proper charger settings and charging time.
SERVICING OPTIONAL SPARK
ARRESTOR
Clean every 100 hours.
MUFFLER MAY BE HOT
• ALLOW ENGINE TO COOL BEFORE INSTALLING
THE SPARK ARRESTER!
• DO NOT OPERATE ENGINE WHILE INSTALLING
THE SPARK ARRESTER!
------------------------------------------------------------------------
NAMEPLATES / WARNING DECALS MAINTE-
NANCE
Whenever routine maintenance is performed on this
machine - or at least yearly - inspect all nameplates and
labels for legibility. Replace those which are no longer clear.
Refer to the parts list for the replacement item number.
BIG RED™ 600
Table D.1 Engine Maintenance Components
ITEM
Air Cleaner Element
Cooling Blower Belt
Oil Filter Element
Fuel Filter Element
Water Separator
Element
Fuel Pre-Filter
Screen
Battery
MAKE
DONALDSON
FLEETGUARD
DEUTZ
GATES
DEUTZ
PUROLATOR
NAPA
FRAM
DEUTZ
PUROLATOR
NAPA
FRAM
LINCOLN
STANADYNE
LINCOLN
STANADYNE
------------
PART NUMBER
P822768
AF25436
223-5256
7580
117-4418
PER2168
1820
PH3776
117-4423
PC42
3358
P4102
M16890-C
31572
M16890-B
29575
BCI
Group
34
SERVICE INTERVAL
CLEAN AS NEEDED
REPLACE EVERY
200 HOURS
SEE
DEUTZ
MAINTENANCE
DECAL
REPLACE EVERY
1000 HOURS
INSPECT EVERY
1000 HOURS
INSPECT EVERY
500 HOURS
WARNING