Filter
Top Products
PLATFORM COMMONALITIES
• Power Feed 10 series Feedhead.
• CGA gas connections.
• Quick connect water connections.
• Works with all PowerWave ArcLink systems. “It is
not compatible with the PowerWave 350, 450 or 500
or Linc-net PowerWave 455ʼs”
OPERATIONAL FEATURES AND CONTROLS
• All procedure settings for the Power Feed 10 Robotic
wire feeder is through software control. A DIP switch
is used to indicate hardware settings.
C-1
ACCESSORIES
C-1
POWER FEED 10 / R
TABLE C.1 –
DRIVE ROLL AND GUIDE TUBE KITS
Wire Size
Solid Steel Electrode
KP No. Series
0.023” - 0.025” (0.6 mm) KP1505 - 030S
0.030” (0.8 mm) KP1505 - 030S
0.035” (0.9 mm) KP1505 - 035S
0.040” (1.0 mm) KP1505 - 045S
0.045” (1.2 mm) KP1505 - 045S
0.052” (1.4 mm) KP1505 - 052S
1/16” (1.6 mm) KP1505 - 1/16S
5/64” (2.0 mm) KP1505-5/64
3/32” (2.4 mm) KP1505-3/32
Cored Electrode
0.030 (0.8 mm) KP1505 - 035C
0.035” (0.9 mm) KP1505 - 035C
0.040” (1.0 mm) KP1505 - 045C
0.045” (1.2 mm) KP1505 - 045C
0.052” (1.4 mm) KP1505 - 052C
1/16” (1.6 mm) KP1505 - 1/16C
0.068” (1.7 mm) KP1505 - 068
5/64” (2.0 mm) KP1505 - 5/64
3/32” (2.4 mm) KP1505 - 3/32
7/64”
Lincore Hard Facing
(2.8mm) KP1505 - 7/64H
7/64” (2.8mm) KP1505 - 7/64
.120” (3.0mm) KP1505 - 120
Aluminum Electrode
0.035” (0.9 mm) KP1507 - 035A
0.040” (1.0 mm) KP1507 - 040A
3/64” (1.2 mm) KP1507 - 3/64A
1/16” (1.6 mm) KP1507 - 1/16A
3/32” (2.2 mm) KP1507 - 3/32A
OPTIONAL EQUIPMENT
• KP1505 Drive Roll and Wire Guide Kits
• KP1507 Drive Roll and Wire Guide Kits
The KP1507 series of drive roll kits contain a number
of components, in addition to the drive rolls, to opti-
mize the wire feeder for aluminum feeding. These
components are specifically designed to protect the
aluminum wire from abrasion and deformation, there-
by avoiding many common aluminum feeding prob-
lems.
• K1546 Conduit