Filter
Top Products
C-3
ACCESSORIES
C-3
Magnum 550 Guns
The easiest and least expensive way to use the
Magnum 550 guns with LN-10 wire feeders is to order
the gun with the K613-2 connector kit, and install a
K1500-3 gun connection kit to the wire feeder.
Lincoln Innershield and Sub Arc Guns
All of these guns can be connected to the LN-10 by
using the K1500-1 Adapter Kit.
Lincoln Fume Extraction Guns
The K556 (250XA) and K566 (400XA) guns require
that a K489-9 Fast-Mate adapter kit be installed.
The K206, K289, and K309
require only the installation of a K1500-1 connector in
the LN-10 wire feeder.
Non-Lincoln Guns
Most competitive guns can be connected to the LN-10
by using one of the K1500 series adapter kits.
K1500-1 (Lincoln Innershield gun standard connection)
Use this kit to connect the following guns: Guns having a
Lincoln standard innershield gun connector, Magnum
200/300/400 with K466-1 connector kit, and Magnum 550
guns with the K613-1 gun connection kit.
K1500-2 (Tweco #2-#4 type connection)
The K1500-2 gun adapter comes factory installed on the
LN-10 wire feeder. Use this adapter for guns that have a
Tweco #2-#4 connector. Such guns include Magnum
200/300/400 guns with K466-2 connector kit, and complete-
ly factory assembled Magnum guns that are factory
equipped with the K466-2 connector (such as the K471-21, -
22, and -23 dedicated Magnum 400 guns and the K497-20
and -21 Magnum 200 guns).
K1500-3 (Tweco #5 connection)
For Magnum 550 gun with K613-2 Connection Kit,
and any other gun having a Tweco #5 connector .
K1500-4 (Miller connection)
For any gun having a newer style Miller connector.
GUN RECEIVER BUSHINGS AND GUN ADAPTERS
K489-9 (Dual Schedule Fast-Mate Adapter)
This adapter installs directly into the wire drive feed-
plate, to provide for use of guns with Fast-Mate or
European style gun connections. This K489-9 will
handle both standard Fast-Mate and Dual Schedule
Fast-Mate guns.
GUN AND CABLE ASSEMBLIES
The following Lincoln gun and cable assemblies are
compatible with 10 Series Wire Feed heads with
appropriate K1500 Gun Adapter:
K126 (Requires K1500-1) Innershield gun and cable
assemblies are rated at 350 amps, 60% duty cycle.
(Consult sales specifications for appropriate models)
K115 (Requires K1500-1) Innershield gun and cable
assemblies are rated at 450 amps, 60% duty cycle.
(Consult sales specifications for appropriate models)
K470 (With K466-9 requires K1500-2) Magnum 300
GMAW gun and cable assemblies are rated 300
amps, 60% duty cycle. (Consult sales specifications
for appropriate models)
K471 (With K466-9 requires K1500-2) Magnum 400
GMAW gun and cable assemblies are rated 400
amps, 60% duty cycle. (Consult sales specifications
for appropriate models)
K497 (With K466-9 requires K1500-2) Magnum 200
GMAW gun and cable assemblies are rated 200
amps, 60% duty cycle. (Consult sales specifications
for appropriate models)
K541 (With K466-9 requires K1500-2) Magnum 400
Short Neck GMAW gun and cable assemblies are
rated 400 amps, 60% duty cycle. (Consult sales
specifications for appropriate models)
K598 (With K613-7 requires K1500-3) Magnum 550
GMAW gun and cable assemblies are rated 550
amps, 60% duty cycle. (Consult sales specifications
for appropriate models) The following Lincoln gun and
cable assemblies are equipped with a Fast-Mate™
connector. They can be used with 10 Series wire feed
models by installing a K489-10 Fast-Mate™ adapter
kit and a K1500-1 Lincoln Gun adapter.
K684 Magnum "Super Cool" FM water cooled
GMAW gun and cable assemblies are rated 450
amps, 100% duty cycle (CO2). (Consult sales specifi-
cations for appropriate models)
K498 Magnum 200 FM GMAW gun and cable
assemblies are rated for 200 amps 60% duty cycle.
(Consult sales specifications for appropriate models)
K534 Magnum 250L FM GMAW gun and cable
assemblies are rated for 250 amps, 30% duty cycle.
(Consult sales specifications for appropriate models)
LN-10