Filter
Top Products
Chamfering
To
make
a
cut
as
shown
at
the right, align the
"V"
groove in
the front base with the edge of the workpiece and plane
it
as
shown in the figure (A).
Sharpening planer blades
Always keep your blades sharp for the best
performance possible. Use the sharpening
holder to remove nicks and produce
a
fine
edge.
First, loosen the two wing nuts
on
the
holder and insert the blades (A) and
(B)
so
that they contact the
sides
(C)
and
(D).
Then tighten the wing nuts.
10