Filter
Top Products
Shiplapping
To
make
a
stepped cut
as
shown
at
the right, use the edge
fence.
Draw
a
cutting line on the workpiece.
In-
sert the edge fence into
the
hole
in the
front
of
the
tool.
Align the blade edge with
the cutting line.
Adjust the edge fence until
it
comes in con-
tact with the side of the workpiece, then
secure it
by
tightening the screw.
You may wish
o
add to the
I
ngth of the
fence
by
attaching an extra piece of wood.
Convenient holes are provided in the fence
for this purpose.
NOTE
:
When planing, move the tool with the edge fence flush with the side of the workpiece.
Otherwise uneven planing may result.
Max. shiplapping depth
is
20
mm
(3/4").
9