Filter
Top Products
To
attach the guide rule (rip fence), use the
hex wrench to loosen the bolt on the base
in front, slip in
the
guide rule and secure
the bolt.
Using
circular
guide
(optional
accessory)
Use
of
the circular guide insures clean,
smooth cutting
of
circles (radius; under
200
mm;
7-7/8")
and arcs.
To
attach the circular guide, use the pin,
inserting
it
in the center hole (arrow) and
secure
it
with the threaded knob. Then
slide the base of the tool forwards. The
circular guide attaches to the base of the
tool in the same manner
as
the guide rule
Fli
pin
into
(rip fence).
10