Filter
Top Products
IMPORTANT
SAFETY INSTRUCTIONS
(For
All Tools)
WARNING:
WHEN USING ELECTRIC TOOLS, BASIC SAFE-
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER-
TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO
SONAL INJURY, INCLUDING THE FOLLOWING:
READ
ALL
INSTRUCTIONS.
5.
6.
7.
8.
9.
10.
11.
12.
13.
2
1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
2.
CONSIDER WORK AREA ENVIRONMENT. Don’t use power tools
in
damp or
wet locations. Keep work area well lit. Don’t expose power tools to rain.
Don’t use tool in presence of flammable liquids or gases.
3. KEEP CHILDREN AWAY. All visitors should be kept away from work area.
Don’t let visitors contact tool or extension cord.
4.
STORE IDLETOOLS. When not
in
use, tools should be stored
in
dry, and high
or locked-up place
-
out of reach of children.
DON’T FORCE TOOL.
It
will
do
the job better and safer at the rate for which
it was intended.
USE RIGHT TOOL. Don’t force small tool or attachment to
do
the job of a
heavy-duty tool. Don’t use tool for purpose not intended; for example, don’t
use circular saw for cutting tree limbs or logs.
DRESS PROPERLY. Don’t wear loose clothing or jewelry.They can be caught
in
moving parts. Rubber gloves and non-skid footwear are recommended
when working outdoors. Wear protective hair covering to contain long hair.
USE SAFETY GLASSES. Also use face or dust mask if cutting operation is
dusty.
DON’T ABUSE CORD. Never carry tool by cord or yank
it
to disconnect from
receptacle. Keep cord from heat, oil, and sharp edges.
SECURE WORK. Use clamps or a vise to hold work. It’s safer than using
your hand and it frees both hands to operate tool.
DON’T OVERREACH. Keep proper footing and balance at
all
times.
MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and
safer performance. Follow instructions for lubricating and changing acces-
sories. Inspect tool cords periodically and if damaged, have repaired by
authorized service facility. Inspect extension cords periodically and replace
if damaged. Keep handles dry, clean, and free from oil and grease.
DISCONNECTTOOLS. When not
in
use, before servicing, and when changin!
accessories, such as blades, bits, cutters.