Filter
Top Products
Ampere Rating
More
Not
More
Than
Than
0-6
6
-
10
10
-
12
12
-
16
17.
OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only
extension cords intended for use outdoors and
so
marked.
18. STAY ALERT. Watch what you are doing, use common sense. Don’t
operate tool when you are tired.
19. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other
part that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation.
A
guard or other part that is
damaged should be properly repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in this instruction manual.
Have defective switches replaced by an authorized service center. Don’t
use tool if the switch does not turn it on and
off.
20. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.
21. REPLACEMENT PARTS. When servicing, use only identical replacement parts.
22. POLARIZED PLUGS.To reduce the risk of electric shock, this equipment has
a polarized plug (one blade is wider than the other). This plug will fit
in
a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install
the proper outlet. Do not change the plug
in
any way.
3
Total Length
of
Cord
in Feet
0
-
25 26-50 51-100 1101-150
AWG
18 16 16 14
18 16 14 12
16 16 14 12
14 12
Not
recommended