Filter
Top Products
Bevel
cutting
With the base tilted, vou can make bevel
.,
cuts
at
any angle between
0"
and
45"
(left
or
right).
Loosen the bolt on the back of the base
with the hex wrench, and slide the base
backwards. Tilt the base to the desired
angle. The edge
of
the housing indicates
the bevel angle. Then check for contact
between the back edge
of
the blade and the
roller.
Now tighten the bolt securely on the back
of
the base.
Front
flush cuts
Loosen the bolt on the back of the base
with the hex wrench, then slide the base
backwards. Check the contact between the
back edge of the blade and the roller, then
secure the bolt.
Edge
of
housing
Roller
.
I
'1
8