Filter
Top Products
OPERATION
Hold the tool firmly. Set the base plate on
the workpiece to be cut without the blade
making any contact. Then turn the tool on
and wait until the blade attains full speed.
Now simply move the tool forward over
the
workpiece surface, keeping it flat and
advancing smoothly until the sawing is
completed.
To
get clean cuts, keep your
sawing line straight and your speed of
advance uniform.
CAUTION:
.Always gently keeps the tool moving straight ahead when cutting. Forcing or twisting
the tool will result in overheating of the motor and dangerous kickback, possibly causing
severe injury.
If
the tool
is
operated continuously until the battery cartridge has discharged, allow the
tool to rest for
15
minutes before proceeding with a fresh battery.
Use a shallow depth of cut when cutting thin workpieces for cleaner, safer cuts. (For
5026DA, 5026DB, 5036DA and 5036DB only)
For
5046DA
and
5046DB only
When you cut angle materials or the like,
the lower guard (safety cover) may rest on
the angle.
If
so,
tilt
other rear
of
the tool to prevent
this.
Angle
Lower guard (safety cover) rests on angle
Tilt
rear
of
tool
17