Filter
Top Products
Tool
Use and Care
Use
clamps or other practical way to secure and support
the
workpiece to a
stable platform. Holding the work by hand or against your body is unstable and
may lead to
loss
of control.
Do
not force tool. Use the correct tool for your application. The correct tool
will
do the job better and safer at the rate for which
it
is designed.
.Do
not use tool if switch does not turn
it
on or off. A tool that cannot be
controlled with the switch is dangerous and must be repaired.
.Disconnect battery pack from tool or place the switch
in
the locked or off
position before making any adjustments, changing accessories,
or
storing the
tool. Such preventive safety measures reduce the risk of starting the tool
accidentally.
Store idle tools out of reach of children and other untrained persons.
Tools
are
dangerous in the hands of untrained users.
When battery pack is not in use, keep
it
away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause sparks, burns, or a fire.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained
tools with sharp cutting edge are less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation.
If
damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may create a risk of injury
when used on another tool.
Service
Tool
service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel may result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions
in the Maintenance section of this manual. Use of unauthorized parts or failure
to follow Maintenance Instructions may create a risk of shock or injury.
3