Filter
Top Products
Operation
Hold the tool firmly. Set the base plate on
the workpiece to be cut without the blade
making any contact. Then turn the tool on
and wait until the blade attains full speed.
Now simply move the tool forward over
the workpiece surface, keeping it flat and
advancing smoothly until the sawing is
completed. To get clean cuts, keep
your
sawing line straight and your speed of
advance uniform.
Fig.
19
CAUTION:
*Always gently keep the tool moving straight ahead when cutting. Forcing or twisting the
tool will result in overheating of the motor and dangerous kickback, possibly causing
severe injury.
*If the tool is operated continuously until the battery cartridge has discharged, allow the
tool to rest for
15
minutes before proceeding with
a
fresh battery.
Guide rule
The handy guide rule allows you to
do
extra-accurate straight cuts. Simply slide
the guide rule up snugly against the side of
the workpiece and secure
it
in position with
the clamp screw on the front of the base.
It
also makes repeated cuts of uniform width
possible.
Fig.
20
15