Filter
Top Products
15.
Place the wider portion of the saw base on that part of the workpiece which
is solidly supported, not on the section that
will
fall off when the cut is made.
As examples, Fig.
5
illustrates the
RIGHT
way to cut off the end of a board,
and Fig.
6
the
WRONG
way.
If
the workpiece is short or small, clamp
it
down.
DON'T
TRY
TO
HOLD SHORT PLACES
BY
HAND!
Fig.
Fig.
circular saw held upside down
in
a
vise. This is extremely dangerous and
can lead to serious accidents.
I
Fig.
'
17.
Before setting the tool down after completing
a
cut, be sure that the lower
(telescoping) guard has closed and the blade has come to a complete stop.
7