Filter
Top Products
Turn the change ring in the direction
of
the
arrow
until
the
1
mark on the change ring
is aligned with
0
mark on the rubber cap to
secure the bit.
Depth
gauge
The depth gauge is convenient for drilling
holes of uniform depth. Insert the depth
gauge into the hole in the grip base. Adjust
the depth gauge to the desired depth and
then tighten the clamp screw to secure the
depth gauge.
Depth gauge
NOTE:
The depth gauge cannot be used at the position where the depth gauge strikes against
the gear housing.
Switch action
To start the tool, simply pull the trigger. Tool
speed is increased
by
increasing pressure on
the trigger. Release the trigger to stop.
CAUTION:
Before plugging in the tool, always check to see that the switch trigger actuates properly
and returns to the
"OFF"
position when released.