Filter
Top Products
Side grip (auxiliary handle)
The side grip swings around to either side,
allowing easy handling of the tool in any
position. Loosen the side grip by turning
it
counterclockwise, swing
it
to the desired
position and then tighten it by turning
clockwise.
Installing or removing the drill bit
CAUTION:
Always be sure that the tool
is switched off and unplugged before installing or removing
‘lamp
Screw
Side
grip
the bit.
To
install the bit, turn the change ring in the
direction of the arrow until the
I
mark on the
change ring is aligned with the
I
mark
on
the rubbedr cap. Align the key groove on the
bit shank with the
1
mark on the rubber cap
and insert the bit.
Key
groove
I
\?
Rubber cap Change ring