Filter
Top Products
6.
Rotate the chisel
so
that the chisel faces toward
the
direction suitable for your work.
Then secure the chisel and chisel dapter to the tool using the clamp screw on the chisel
adapter.
7. Set the action mode changing knob
to
"hammering only". Now you can use the chisel.
8.
To
remove the chisel,
follow
the installation procedures in reverse.
CAUTIO N
:
Always use "hammering only" action when the chisel adapter
is
installed on the tool. If
you use "rotation with hammering" or "rotation only", a malfunction and damage
to
the
tool
will result.
Blow-out bulb
Use the blow-out bulb to clean
out
the hole.
Dust
cup
Use the dust cup to prevent dust from fall-
ing over the
tool
and on yourself when per-
forming overhead drilling operations. Attach
the dust cup to the bit as shown in the figure.
The dust cup can be attached
to
the bit up
to
14.5
mm
(9/16")
in diameter.
Drilling in wood or metal
Use the optional drill chuck assembly (con-
sisting
of
drill chuck and chuck adapter as-
sembly). When installing
it,
refer to
"installing
or
removing drill bit" described on
the previous page. Set the action mode
changing knob to "rotation
only".
You can
drill up to
13
mm
(1/2")
diameter in metal
and up
to
18
mm
(11/16")
diameter in wood.
Chuck
adapter
a
I
Drill
chuck
13