Filter
Top Products
P 6/16
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Depth Guide
Fig. 5
ASSEMBLING
Assemble Depth guide section by taking the reverse step of Disassembling. (Fig. 4)
Note: Follow the important instructions described in Fig. 5.
M5x8 Hex socket
set screw
1. M6x18 Hex bolt must be mounted to Blade case so that the concave surface of the bolt head faces
M5x8 Hex socket set screw.
M6x18 Hex bolt
Base
Blade case
M4x8 Pan head screw
2. M4x8 Pan head screw must be seen closest to Handle when Lever 70 is in the locking position
with the cutting depth of the machine adjusted to minimum.
concave
surface
Handle
Lever 70 in the locking position,
with the cutting depth of the machine
adjusted to minimum