Filter
Top Products
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Base complete (cont.)
DISASSEMBLING
4. Loosen Lock lever.
Base can be separated
from Motor section.
5. Remove Pole, Silent pole, Compression spring 13
and Compression spring 11.
6. Remove Base plate by unscrewing
M4x10 Countersunk head screw (4pcs.)
7. Remove Lock plate by unscrewing M5x10 Set bolt (2pcs.)
Separate Compression spring 4 (2pcs.) from Lock plate.
M4x10
Countersunk
head screw
(4pcs.)
Base plate
The other parts can be removed from Base
complete as illustrated below.
Lock plate
Compression
spring 4 (2pcs.)
M5x10 Set bolt (2pcs.)
Motor section
M6 Hex nut
M10 Screw
Remove M6 Hex nut, Flat washer 6
and M10 Screw.
Stopper
Compression spring 5
Compression spring 7
Compression
spring 7
Steel ball 7.1
M4x19 Thumb screw
M5x14 Thumb screw
M5x14
Thumb screw
O ring 3
M6 Flat head screw O ring 8
Flat washer 6
Fig. 3
Fig. 4
Fig. 5
(2) Remove Base plate, Lock plate, Compression spring 4 and other component parts.
Refer to Figs. 4 and 5.
Silent pole
Pole
Compression
spring 11
Compression
spring 13
Repair
P 4/ 27