Filter
Top Products
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Armature, Motor bracket complete (cont.)
DISASSEMBLING
Compression
spring 4
Switch
lever
Compression spring 5
Lock off button
Grip R
Switch
Grip R
Connector of Controller
In case of Models RP1800F, RP1801F, RP2300FC and RP2301FC,
disconnect Connector of Controller from LED circuit prior to
the step described in Fig. 11.
Disassemble Switch lever, Lock off button, Compression spring 5, Compression spring 4
from Grip R. And remove Grip R from the machine by unscrewing M5x25 Pan head screw.
In case of Models RP1800 and RP1801, refer to Fig. 11.
M5x25 Pan Head screw
Fig. 9
Fig. 10 Fig. 11
Fig. 12
Armature
Motor
bracket
Remove Motor bracket together with
Armature from Motor housing by
removing 5x35 Tapping screw (4pcs.)
5x35 Tapping
screw (4pcs.)
1R041
Retainer
Remove Retainer from Armature shaft by:
1) holding Armature using 1R041 and vise
2) turning counterclockwise with Wrench 41 or Hex socket 41-80.
Repair
P 6/ 27