Filter
Top Products
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Reciprocating Mechanism
ASSEMBLING
ASSEMBLING
DISASSEMBLING
[3] -3. Lever 19
Fig. 8
11. Assemble Housing R while
inserting Change lever into
the assembling hole.
10. Mount Change lever to the Switch
while inserting the protrusion of Switch
into the hole of Change lever.
Change lever
Change lever
Housing R
(5) Assemble Housing R (Fig. 8).
(1) After separating Housing R, remove DC motor and Reciprocating mechanism from Housing L.
So, the stem of Lever 19 comes into your sight. Now, Lever 19 can be disassembled by removing Stop ring E-4
(Fig. 9).
Fig. 9
Steel ball 4
Lever 19
Stop ring E-4
Take the reverse step of Disassembling (Fig. 9).
DC motor
Reciprocating
mechanism
1. Remove Stop ring E-4 from
the stem of Lever 19.
2. Pull off the Lever 19 while paying attention not
to lose Steel ball 4 and Compression spring 14.
Compression
Spring 4
Stem of
Lever 19
Housing L
Housing L
P 7/ 11