Filter
Top Products
13
Control Panel
Personality settings
* Setting may be overridden via DMX. See the protocol for details.
Personality Path Options Effect (Default settings shaded.)
Pan/tilt speed PTSP
FAST
Optimize movement for speed*
SLOW
Optimize movement for smoothness*
Pan/tilt swap PATI/SWAP
ON
Map DMX pan control to tilt channel and vice versa
OFF
Normal pan and tilt control
Pan inverse PATI/PINV
ON
Reverse DMX pan control, right left
OFF
Normal pan control, left right
Tilt inverse PATI/TINV
ON
Reverse DMX tilt control, down up
OFF
Normal tilt control, up down
Fixture type SPEC/FTYP
PRIS
Operate with rotating prism
FROS
Operate with optional variable frost
Display on/off SPEC/dISP
ON
Display stays on
OFF
Display goes out 2 minutes after last key press
Display intensity SPEC/dINT
10-100
Adjust display intensity
DMX lamp off SPEC/dLOF
ON
Enable DMX lamp off command
OFF
Disable DMX lamp off command*
DMX reset SPEC/dRES
ON
Enable DMX reset command
OFF
Disable DMX reset command*
Automatic lamp on SPEC/ALON
ON
Lamp strikes automatically within 90 seconds of power on
OFF
Strike lamp from controller
Automatic protocol
detection
SPEC/AUTO
ON
Enable automatic protocol detection
OFF
Disable automatic protocol detection
Tracking algorithm SPEC/TRAC/MOdE
MOd1
Absolute delta value algorithm (for most controllers)
MOd2
Real delta value algorithm
Tracking samples SPEC/TRAC/CAL
1-10
Tracking mode sample level - default is 6. Higher levels give
smoother movement but slower acceleration.
Shortcuts SPEC/SCUT
ON
Color wheels and fixed-gobo wheel turn the shortest
direction*
OFF
Wheels turn same direction*
DMX macros SPEC/dMAC
ON
Enable DMX-selectable macros and pulsating effects
OFF
Disable DMX-selectable macros and pulsating effects
Studio mode SPEC/MOdE
NORM
Optimize effects for speed
STUd
Optimize effects for silence
Fixed gobo mode SPEC/gMOd
FIX
Static gobo wheel steps between full positions
SCRL
Static gobo wheel scrolls continuously
Dimmer mode SPEC/dMOd
NORM
Normal dimming curve
TUNG
Simulated tungsten dimming curve
Pan/tilt feedback SPEC/FEbA
ON
Enable pan/tilt position correction system
OFF
Disable pan/tilt feedback. Setting not saved
Effects feedback SPEC/EFFb
ON
Enable feedback from magnetic sensors on color
wheels, fixed-gobo wheel, and rotating-gobo index
OFF
Disable feedback from magnetic sensors
Iris reflection reduc-
tion
SPEC/IRR
ON
Iris opens 95 percent. Recommended for early units only
OFF
Iris opens 100 percent