Filter
Top Products
74 |
74 |
MHE 56 MHE 96
CHIPPING HAMMERS
Special advantages
Easy to hold in all working situations: three
rubber-coated handles always ensure
an optimal holding position
Long, slim design for an upright working
position when performing tasks at ground
level
Optional 30% impact reduction setting
for working with more pliant materials
Thumbwheel for preselection of impact rate
Die cast aluminium gear housing
Magnesium die cast gear housing
Chisel can be fixed in 12 positions
Chisel can be fixed in 16 positions
Brush wear indicator
The service display, for example, indicates
when the carbon brush needs to be replaced,
plus an LED indicating mains voltage
Comparative device characteristics
Rated input power 1.300 W 1.600 W
Output power 650 W 800 W
Maximum impact rate 2.840 /min 1.950 /min
Maximum single-blow energy 14 J 27 J
Bit retainer SDS-max SDS-max
Weight (without mains cable) 6,3 kg 11 kg
Standard equipment Front handle, lubricant for tool shank end,
duster, carry case
Metabo VibraTech (MVT) side handle, front
handle, lubricant for tool shank end, duster,
carry case
Type MHE 56 MHE 96
Order no. 6.00366
6.00396
COMMON FEATURES
Suitable for bits and accessories with SDS-max shank end
Metabo VibraTech (MVT): reduced vibration levels and therefore
less impact on joints due to the integrated damping system
on the handles
Additional handle can be fitted to three places on the housing
The adjustable front handle can be rotated 360° and the angle
adjusted
Vario Tacho Constamatic (VTC) full-wave electronics
Electronic soft start
Pneumatic high-performance hammer mechanism
Stoppable switch for trouble-free chiselling in continuous
operation
Auto-stop carbon brushes
Electronic Chipping Hammer
MHE 56
Electronic Chipping Hammer
MHE 96
NEW NEW