Filter
Top Products
| 69
BHE 20
Compact
BHE 20 IDR
Special advantages
Removable dust extraction
unit (IDR extraction unit)
for dust-free drilling
Comparative
device characteristics
Torque 8 Nm 8 Nm
Drilling capacity in
- Concrete with hammer
drill bits
20 mm 20 mm
- Steel 10 mm 10 mm
- Softwood 20 mm 20 mm
No load speed 0 - 1.000 /min 0 - 1.000 /min
Rated input power 450 W 450 W
Output power 150 W 150 W
Rated load speed 800 /min 800 /min
Maximum impact rate 4.900 /min 4.900 /min
Maximum single-blow
energy
1,6 J 1,6 J
Bit retainer SDS-plus SDS-plus
Weight (without mains cable) 3,5 kg 2,1 kg
Standard equipment Hammer chuck
for tools with
SDS-plus shank
end, iDR extrac-
tion unit, metabo
VibraTech (MVT)
handle, carry case
Hammer chuck
for tools with
SDS-plus shank
end, metabo
VibraTech (MVT)
handle, carry case
Type BHE 20 IDR BHE 20 Compact
Order no. 6.00403
6.00402
COMMON FEATURES
Suitable for bits and accessories with SDS-plus shank end
With the appropriate accessories, it is also suitable for bits
and accessories with cylindrical shank end (no impact)
Hammer stop
Clockwise and anticlockwise rotation
Variospeed (V) electronics
Pneumatic high-performance hammer mechanism
Sheathed die cast aluminium gear housing
Optimum weight distribution by L shape
Ergonomic housing design for fatigue-proof operation
Rubber-coated handle
Metabo VibraTech (MVT) handle for vibration damping
Metabo S-automatic torque limiting clutch
Scaffolding hook (accessory) for hanging the machine
on scaffoldings or ladders
BHE 20 IDR BHE 20 Compact
ROTARY HAMMERS
NEW
design award
winner 2007
Accessories for BHE 20 Compact and BHE 20 IDR
Order no.
IDR extraction unit
Suitable for the rotary hammer BHE 20 Compact.
As the extraction unit has its own motor,
output is independent of the speed of the
rotary hammer. Even at times when speed
is relatively low, when spot-drilling for example,
full dust extraction capacity is maintained.
Only for drilling with hammer drill bits
in concrete, stone or masonry. Not for use in
conjunction with chiselling.
The pleated filter can be removed without
tools for cleaning; thus ensuring
a long service life
The service life of the pleated filter can
be substantially prolonged if it is cleaned
with compressed air
The sealing cap on the extraction
nozzle and the moulded seal can be
exchanged without tools
Drill bit Ø: 4 - 16 mm
Maximum drill length: 160 mm
Rated input power: 110 W
Weight: 1.400 g
6.30591
Pleated filter IDR
6.30606
IDR moulded seal (2x)
6.30607
Nozzle with sealing cap for IDR
6.30608
Nozzle w. brush (IDR)
6.30609
IDR sealing caps (5x)
6.30610
NEW
Electronic
Rotary Hammer
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
WOOD SANDING
MACHINES
ROUTERS
AND PLANERS