68 |
UHE 28 MultiUHE 22 Multi
CODE!
MULTIHAMMERS
Special advantages
Metabo CODE! System: electronic anti-theft
system, activated by CODE! key (accessory)
Variospeed (V) electronics
Vario Tacho Constamatic (VTC) full-wave
electronics
Overload protection
No-volt release switch
Brush wear indicator
Comparative device characteristics
Torque 15 Nm/6 Nm 22 Nm/8 Nm
Drilling capacity in
- Concrete with hammer drill bits 22 mm 28 mm
- Masonry with TCT bits 80 mm
- Steel 13 mm/8 mm 16 mm/8 mm
- Softwood 30 mm/20 mm 40 mm/20 mm
No load speed 0 - 1.050 / 0 - 2.900 /min 0 - 950 / 0 - 2.600 /min
Rated input power 705 W 1.010 W
Output power 410 W 600 W
Rated load speed 700/1.900 /min 950/2.600 /min
Maximum impact rate 4.800 /min 4.400 /min
Maximum single-blow energy 2,2 J 2,4 J
Collar diameter 43 mm 43 mm
Bit retainer SDS-plus SDS-plus
Chuck capacity 1,5 - 13 mm 1,5 - 13 mm
Weight (without mains cable) 2,7 kg 2,8 kg
Standard equipment Hammer chuck for tools with SDS-plus shank
end, quick-action keyless chuck for tools with
cylindrical shank end, rubber-coated side
handle, drilling depth guide, carry case
Hammer chuck for tools with SDS-plus shank
end, quick-action keyless chuck for tools with
cylindrical shank end, rubber-coated side
handle, drilling depth guide, carry case
Type UHE 22 Multi UHE 28 Multi
Order no. 6.00693
6.00361
COMMON FEATURES
Suitable for bits and accessories with SDS-plus shank
end or cylindrical shank end (without impact)
Hammer stop
Rotation stop
Metabo "Quick" chuck change
Clockwise and anticlockwise rotation
Thumbwheel for preselection of speed
Robust Metabo Marathon motor
Two-speed gear unit
Pneumatic high-performance hammer mechanism
Die cast aluminium gear housing
Ergonomic housing design for fatigue-proof operation
Rubber-coated handle
Metabo S-automatic torque limiting clutch
Metabo winding protection grid
Auto-stop carbon brushes
... with the Metabo CODE! The
electronic security system protects
against theft and unauthorised use.
Multihammer
UHE 22 Multi
Multihammer
UHE 28 Multi