| 75
| 75
THE CARBIDE-TIPPED HAMMER DRILL BIT
SDS-plus „Pro 4“ hammer drill bit
The most modern generation of hard-metal drills:
Long service life, fast and no problem when cutting on
steel reinforcements. The new cutting geometry on the
chisel-shaped bit ensures quick penetration into the
toughest concrete and granite. Life cycle and drilling
speed are increased considerably, which results in
reducing the costs for the user.
A HUNDRED THOUSAND TIMES SUCCESSFUL ON CONCRETE, BRICKWORK AND NATURAL STONE.
SDS max hammer drill-bit
Slim, dynamic drill points with chisel form
drill head
This means
– speedy penetration into the material
– easy centring
The 4-spiral helix „Pro 4“
enables fast delivery of bore dust, decreases
friction in the bore hole and improves the
vibration behaviour.
The continuous core reinforcement
ensures stability, durability and the optimal
transfer of energy. It supresses vibrations
thus increasing the drilling progress and life
expectancy.
For optimal performance with hammer drills
of class 2 to 4 kg with SDS-plus-tool holder
Most modern thermal treatment and surface
compaction
guarantees prevention of wear on surfaces
and make the drill resistant against bending.
SDS-plus shaft
Maximum energy transfer
The optimized core reinforced spiral form
ensures stability,durability and the optimal
energy transfer. It dampens the vibrations
and therefore increases the drilling progress
and life expectancy.
SDS-max shaft
Dynamic head construction with main
and secondary cutting edges
This means
– point accurate spot drilling
– fast penetration rate
– reduced friction in the bore hole
– centric guide
The bore diameter 12–15 mm are produced
with 2 cutting edges
For optimal performance with hammer
drills of its class, starting from 5 kg with
SDS-plus-tool holder
Double delivery helix
Short spiral inlets and large boring dust
grooves ensure quick boring dust discharge.
Most modern thermal treatment and surface
compaction
guarantees prevention of wear on surfaces
and make the drill resistant against bending.
ANGLE GRINDERSMETAL PROCESORSHAMMERSIMPACT DRILLSDRILLSSCREWDRIVERS
WOOD SANDING
MACHINES
ROUTERS
AND PLANERS