Filter
Top Products
78 |
ᕅ
ᕆ
ᕇ
ᕈ
ᕉ
ᕊ
ᕋ
ᕍᕠ
ᕍᕗ
ᕍᕘ
ᕍᕙ
ᕍᕚ
ᕍᕛ
ᕍᕜ
ᕍᕝ
ᕍᕞ
ᕎᕠ
ᕍᕟ
Chisel with SDS-plus shank end
Chisel shape Overall
length
mm
Cutting
width
Order
no.
Pointed chisel,
round tip
250 6.30992
Pointed chisel,
square tip
250 6.31421
Flat chisel 250 20 6.31420
Scaling chisel 250 40 6.31425
Chasing gouge 250 22 6.31422
Mortar chisel,
carbide-tipped
130 6.31423
Mortar chisel,
carbide-tipped
200 6.31424
Tile chisel,
offset
250 40 6.31456
Assortment of chisels with SDS-plus shank end
Order
no.
SDS-plus drill bit / chisel set
(5 piece)
Consisting of hammer drill bits of
Ø 6, 8, 10 mm (1 each),
1 pointed chisel (6.31421) and
1 flat chisel (6.31420)
Plastic round box
6.30477
SDS-plus chisel set
(3 piece)
Comprising
1 pointed chisel (6.31421),
1 flat chisel (6.31420) and
1 scaling chisel (6.31425)
Plastic round box
6.30478
SDS-plus chisel set
(5 piece)
Comprising
2 pointed chisels (6.31421),
2 flat chisels (6.31420) and
1 scaling chisel (6.31425)
Plastic round box
6.30484
Chiselling attachment
Order
no.
In order to work without
rotary motion with the chisels
6.31420, 6.31421, 6.31422,
6.31423, 6.31424, 6.31425 and
6.31426 you must use the
chiselling attachment 6.31409.
6.31409
Carbide core cutters, M 16 female thread
Optimised with larger carbide teeth
for longer tool life. Higher power
efficiency due to stably, thin-walled
bit bodyFor concrete and masonry
Diameter
mm
Working length
mm
Order
no.
25 55 6.23390
30 55 6.23391
35 55 6.23392
40 55 6.23393
50 55 6.23394
68 55 6.23395
82 55 6.23396
90 55 6.23397
100 55 6.23398
112 55 6.23399
Carbide pilot drills for core cutters
Diameter
mm
Overall length
mm
Order
no.
8 120 6.27040
Anchor-head holders with
M 16 male thread
Order
no.
Anchor-head holder
KW 11
Overall length: 90 mm
6.27041
anchor-head holder
SDS-plus
Overall length: 105 mm
6.27043
anchor-head holder
SDS-plus
Overall length: 220 mm
6.27042
Accessories
Order
no.
Connector
With 1/2"-20 UNF thread for
the connector 6.30283 for
hammer drill bits with ratio
thread and core cutters
6.30928
Connector
For hammer drill bits with
ratio thread and for fitting
the core bit using the pilot
drill 6.23038
6.30283
Connector
With 1/2"-20 UNF thread for
chuck and hexagon recess
1/4" (6.35 mm) for screwdriver
bits with bit retaining bush
6.31285
Bit retaining bush
For fitting bits and sockets with 1/4" (6.35 mm)
hexagon in the spindle of drills and impact
drills with spindle thread 1/2"-20 UNF and
hexagon recess 1/4" (6.35 mm)
6.31281
Geared chuck
Clamping width: 1,5 - 13 mm
Female thread: 1/2"-20 UNF
Key size: 2
6.35035
SDS-PLUS ACCESSORIES