Filter
Top Products
30
ENGLISH
15. Technical Specifications
Voltage V230(1∼ 50 Hz) 110 (1∼ 50 Hz)
Current draw A 5.8 11.9
Fuse protection A 10 (time-lag) 16 (time-lag)
Motor capacity (power input P1, S6 20% - 5 min) kW 1.3 1.3
Protection class IP 20 20
Degree of protection II II
Saw blade speed min
-1
5500 4720
Cutting speed m/s 55 60
Saw blade diameter (outer) mm 210 210
Arbor bore mm 30 30
Dimensions
Machine in packing
− Length / width / height
Saw ready to operate, rotating table in 0°-position
− Length / width / height
mm
mm
645/ 540 / 375
1020/ 508/ 470
645/ 540 / 375
1020/ 508/ 470
Maximum workpiece cross section
Standard cross cuts
− width / height
Mitre cuts (rotating table 45°)
− width / height
Bevel cuts (track arm holder 45° left)
− width / height
Compound mitre cuts (rotating table 45° / track arm holder 45 ° left)
− width / height
mm
mm
mm
mm
255/ 60
177/ 60
255/ 30
177/ 30
255/ 60
177/ 60
255/ 30
177/ 30
Weight
Machine in packing
Machine ready to work
kg
kg
20.5
17
20.5
17
Permissible ambient temperature for operation
Permissible temperature for transport and storage
°C
°C
0 to + 40
0 to + 40
0 to + 40
0 to + 40
Noise emission according to EN ISO 3744
Sound power level L
WA
Sound pressure level at operator ear L
PA
dB (A)
dB (A)
109
96
109
96
Effective value of weighted acceleration
(vibration at handle)
m/s
2
< 2.5 < 2.5
Dust extractor (not included in standard delivery)
− Suction port diameter
− Minimum air volume flow
− Minimum vacuum at suction port
− Minimum air speed at suction port
mm
m
3
/h
Pa
m/s
43,5
550
740
20
43,5
550
740
20
Flange laser
Max. output power
Wave length
Laser product class
Batteries
mW
nm
3×type
1.0
650
2
AG13 / LR44
1.0
650
2
AG13 / LR44
This machine is specially designed for the high momentary loads of crosscutting. The motor reaches the stated power of 1200 watts
at S6 20% 5 min (intermittend periodic duty-type with starting). This means that this saw can be operated for 1 minute at full-load
rating (1200 watts) within a 5 minute operating period. The motor has to deliver these 1200 watts only under extreme load condi-
tions - during normal crosscutting it is subjected to much lower loads. With lower loads the duty cycle of the motor increases sub-
stancially. Thus, when used as specified, because of its high reserve capacity, overheating or overloading of the motor is not possi-
ble.