Filter
Top Products
OM-173 413 Page 24
SECTION 6 – OPERATING AUXILIARY EQUIPMENT
6-1. 120 Volt And 240 Volt Duplex Receptacles
Ref. ST-188 449
Y If unit does not have GFCI recep-
tacles, use GFCI-protected exten-
sion cord.
. If a circuit breaker continues to open,
contact Factory Authorized Service
Agent.
. Auxiliary power is not affected by weld
output.
1 240 V 15 A AC Receptacle RC1
2 120 V 15 A AC Receptacle RC2
Receptacles supply 60 Hz single-phase
power at weld/power speed.
3 Circuit Breakers CB1 And CB2
CB1 protects RC1 and CB2 protects RC2
from overload. If CB1 or CB2 opens, the re-
ceptacle does not work. 120 volts may still
be present at RC2.
Maximum output from each duplex recep-
tacle is 1.8 kVA/kW, and 3 kVA/kW from all
receptacles.
EXAMPLE: If 10 A is drawn from RC1, only
5 A is available at RC2:
(240 V x 10 A) + (120 V x 5 A) = 3.0 kVA/kW
1
2
3
6-2. Optional Auxiliary Power Receptacles
Ref. ST-188 449 / Ref. ST-169 671-A
Y If unit does not have GFCI recep-
tacles, use GFCI-protected exten-
sion cord.
. If circuit breaker continues to open,
contact Factory Authorized Service
Agent.
. Auxiliary power is not affected by weld
output.
GFCI Receptacle Option
1 120 V 15 A AC GFCI Receptacle
GFCI1
Auxiliary power output and circuit breaker
protection is the same as standard recep-
tacles (see Section 6-1).
If a ground fault is detected, GFCI Reset
button pops out and receptacle does not
work. Check for faulty tools plugged in re-
ceptacle. Press button to reset.
. At least once a month, run engine at
weld/power speed and press test but-
ton to verify GFCI is working properly.
2 240 V 13 A AC British Receptacle
RC1
3 240 V 16 A AC South African Recep-
tacle RC1
4 240 V 10 A AC Australian Receptacle
RC1
5 Circuit Breaker CB1
Receptacle supplies 60 Hz single-phase
power at weld/power speed. Maximum out-
put is 3 kVA/kW.
CB1 protects the receptacle from overload.
If CB1 opens, the receptacle does not work.
120 volts may still be present at the 240 V
receptacle.
Combined output of all receptacles is 3 kVA/
kW.
5
43
5
5
2
1