Miller Electric Big Blue 502P Welding System User Manual


 
OM-491 Page 24
SECTION 7 MAINTENANCE & TROUBLESHOOTING
7-1. Routine Maintenance
Recycle engine
fluids.
Y Stop engine before maintaining.
. See also Engine Manual and Mainte-
nance Label. Service unit more often if
used in severe conditions.
* To be done by Factory Authorized
Service Agent.
8 h
Check Fluid
Levels. See
Section 4-7.
Wipe
Up
Spills.
Drain Water
From Fuel
System.
OIL
Full
FUEL
WATER
Coolant
Full
50 h
Clean Air Filter.
See Section 7-3.
Clean And
Tighten
Weld
Terminals.
100 h
Clean And
Tighten
Battery
Connections.
200 h
Replace
Unreadable
Labels.
1/2 in.
(13 mm)
Check Belt
Tension.
250 h
Check And
Clean Spark
Arrestor. See
Section 7-4.
400 h
Change Oil. See
Section 7-6.
Change Oil
Filter. See
Section 7-6.
Check Radiator
Fluid Level. See
Section 4-7.