Miller Electric Bobcat 225G Welding System User Manual


 
OM-175 104 Page 15
6-4. Changing Engine Oil, Oil Filter, And Fuel Filter
Ref. ST-801 188-A / Ref. ST-801 221 / Ref. ST-178 079-A / ST-800 395 / S-0842
Y Stop
engine and let cool.
1
Oil Drain V
alve
2
1/2 ID x 12 in Hose
3
Oil Filter
4
Oil Fill Cap
5 Oil Dipstick
Change engine oil and filter ac-
cording
to engine owner
s manual.
Y Close valve and valve cap
before adding oil and run-
ning
engine.
Fill crankcase with new oil to full
mark
on dipstick
(see Section 6-2).
6 Fuel
Filter
7
Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any
spilled
fuel.
Start engine, and check for fuel
leaks.
Y Stop engine, tighten con-
nections as necessary, and
wipe
up fuel.
1
2
4
3
5
6
7
T
ools Needed: