Filter
Top Products
OM-223 839 Page 9
3-6. Circuit Protection
1 Circuit Breaker CB1
Circuit breaker CB1 is located in-
side the wire feeder as shown.
CB1 Protects the auxiliary 24 volt
AC circuit from overload.
1
3-7. Connecting Wire Feeder to Power Source
Make connections as shown. Be
sure connections are tight.
1 14 Pin Control Cord
2 Weld Cable (see Section 3-8
for connection inside wire
feeder)
3 Gas Hose
Connect hose to feeder using sup-
plied clamp. Connect other end of
gas hose to the power source gas
cylinder or gas circuit.
4 Blue Quick Connect Fitting
(Coolant Output to Gun)
Connect blue to blue and red to red.
5 Red Quick Connect Fitting
(Coolant Return From Gun)
Connect blue to blue and red to red.
6 Work Cable Clamp (see
Section 3-8)
7 Cable Bundle Collar (see
Section 3-8)
2
1
5
4
1
2
3
7
6
4
5