Filter
Top Products
AUS
NZ
Warranty Policy
In addition to any legally stipulated warranty rights
resulting from the purchase, Milwaukee Electric Tool are
warranted to be free from defects in material and work-
manship as stated below.
1. The warranty period is 24 months from the date of
purchase. This must be documented by an invoice or
other proof of purchase.
2. The warranty period for battery packs and chargers is 12
months from the date purchase.
3. The warranty period for all Milwaukee power tools
purchased from 01 April 2009 onwards in Australia and
New Zealand will be extended to 36 months provided
that the end users register their newly acquired tools
for the extended warranty online within four weeks of
the date of purchase using the online registration form
at www.aeg-pt.com. Furthermore, buyers must give
their consent to the storage of the data which they are
required to enter online. The registration confi rmation,
which is sent out by e-mail, and the original receipt
showing the date of purchase will serve as proof of the
extended warranty. Rechargeable battery packs, battery
chargers and any accessories supplied are not included
in the extension of the warranty. Your statuary rights are
not affected.
4. This warranty does not cover: 1) repairs made or
attempted by other than Techtronic Industries Australia
/ Techtronic Industries New Zealand or their authorized
Service Agents; 2) normal wear and tear. Parts such
as carbon brushes, bearings, seals, o-rings etc. must
be regularly inspected so that the wear and tear on
such parts does not lead to failure of the machine. For
optimum performance the machine should be inspected
regularly by an authorized service agent; 3) abuse; 4)
misuse; 5) improper maintenance; 6) continued use after
partial failure; 7) tools that have been modifi ed; tools with
electronics used on generators; or product used with an
improper accessory.
5. Should a problem develop, return the complete product
to Techtronic Industries Australia or their authorised
Service Agents (if purchased in New Zealand to
Techtronic Industries New Zealand or their authorised
Service Agents); freight prepaid and insured. If inspection
shows the problem is caused by a defect in material or
workmanship, all repairs will be made at no charge and
the product will be returned, transportation prepaid. A
warranty repair does not constitute an extension or a new
start of the warranty period.
6. In no event shall Techtronic Industries Australia / Techtro-
nic Industries New Zealand, or any of it affi liates, be liable
for consequential, incidental or indirect damages or other
losses or expenses incurred by reason of use or sale of
the product. This warranty is in lieu of all other warran-
ties, expressed or implied whether for merchantability or
fi tness for particular use or purpose.
PRC
保証
根据法律规定，产品销售后必须有保証服务。这产品的保
证服务如下。
保证期限 6 个月(欧洲, 针对工业用途 12个月, 一般用途 24个
月). 取得机器及购买发票或其它类似文件后,便开始记算保
证期限.
一）这产品的保証期将按照有关国家的法例而定。购买日期
以购买单据及保修咭（如适用）作証明。
二）保証期间，保証只有效於产品损坏是因为製造所造成或
是原料的欠缺，而不是修理和调整。保証无效如果产品的
损坏是因为误用，用法不合说明手册或是坏於错误的衔
接。
三）售后服务，产品必须送至於各自阿特拉斯正式授权售后
服务站，地址於以下的目录。其他地区，您的阿特拉斯电
动工具代理商将负责把您的产品送至阿特拉斯售后服务中
心。在运送期间，产品必须有安全的包装，送货人的地址
注明和描写工具损坏情形。
四）修理是免费的。修理后，这保証期是没有延长或从新开
始。我们有权保存一切改换的备件。
ROC
保証
根據法律規定，產品銷售後必須有保証服務。這產品的保
證服務如下。
一）這產品的保証期將按照有關國家的法例而定。購買日期
以購買單據及保修咭（如適用）作証明。
二）保証期間，保証只有效於產品損壞是因為製造所造成或
是原料的欠缺，而不是修理和調整。保証無效如果產品的
損壞是因為誤用，用法不合說明手冊或是壞於錯誤的銜
接。
三）售後服務，產品必須送至於各自 阿特拉斯 正式授權售後
服務站，地址於以下的目錄。其他地區，您的 阿特拉斯 電
動工具代理商將負責把您的產品送至 阿特拉斯 售後服務中
心。在運送期間，產品必須有安全的包裝，送貨人的地址
注明和描寫工具損壞情形。
四）修理是免費的。修理後，這保証期是沒有延長或從新開
始。我們有權保存一切改換的備件。
289 971 - Mil-Gar-Serv-Rev 2009-10.indd 11289 971 - Mil-Gar-Serv-Rev 2009-10.indd 11 16.10.2009 12:27:3816.10.2009 12:27:38