Filter
Top Products
SAFEGUARDS AND PRECAUTIONS
WARNING - This product emits a visible beam of laser
light. Avoid exposure to the laser radiation. The use of
optical viewing aids (binoculars, for example) may
increase the ocular hazard.
CAUTION - The laser beam should not be intentionally
aimed at people or animals.
CAUTION - Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
WARNING - Use only the “PR Universal” charger supplied
with the product.
Read and follow all instructions in this manual carefully,
and retain this manual for future reference.
Do not use this instrument in any manner inconsistent
with these operating instructions or under any
conditions that exceed the environmental specifications
stated.
This instrument is not user serviceable. For technical
assistance, contact the sales organization from which
you purchased the product.
12
Examples:
1234.56<cr>
123456.<cr>
_ _ _ _0.0<cr> ( _ = space character)
10.0 CHARGING
Slide the Power switch (8) to the Off/Charge position and plug in the
charger. The Power LED (4) will blink red while the unit is fast charging.
The Power LED will blink amber when slow (trickle) charging. It will be
solid amber when the batteries are fully charged.
Note: If the charger is plugged in when the Power switch is the on
position, the batteries will be trickle charged during operation.
CAUTION: Use only the supplied PR-Universal charger with the
sensor.
11.0 ACCESSORIES
T-5 Reflective Tape, 5 foot [1.5 m] roll, ½ inch [13 mm] wide
T-5WP Waterproof Reflective Tape (honeycomb pattern), 5
foot [1.5 m] roll, 1 inch [25 mm] wide
SLS-CA-BNC Cable assembly with BNC connector (SO)
SLS-CA-W Cable assembly with tinned leads
SLS-CA-P Cable assembly with 1/8 inch [3.5 mm] mono plug (SO)
SLS-CA-RS232 Cable assembly with DB9 connector for RS232
SLS Battery Pack Replacement rechargeable Ni-Cd batteries
PR Universal Recharger/Power Supply with assorted adapter plugs