Filter
Top Products
2
3
1
4
5
R
3
1
2
4
5
Operating instructions
COOL, DRY, HEAT operation
Recommended operation mode:
Please use cooling mode in summer
and heating mode in winter.
Please use DRY mode in spring or
autumn humid climate.
Unit start
Press the "ON/OFF" key to turn on the unit.
The LCD on the remote controller displays the prev-
ious operating conditions (excluding previous timer,
sleep and louver conditions).
The remote controller operation indicator turns on.
Select operation mode
Press the "MODE" key to alter the working mode.
Each pressing will change the operation mode in the
following sequence:
AUTO COOL DRY FAN HEAT
The air conditioner will operate with the displayed
running mode.
Select your desired operation mode and get the display
stop at the corresponding indication.
Select a desired temperature
Press the TEMP setting keys.
Every time pressing the " " key, the temperature
setting will increase by 1
o
C.
Every time pressing the " " key, the temperature
setting will decrease by 1
o
C.
Set a suitable temperature value.
Fan speed selection
Press the FAN "SPEED" key to change the fan speed.
Each press will change the fan speed in the following
sequence:
LOW MID HIGH AUTO
L L M L M H L M H
AUTO
The air conditioner will run at the fan speed displayed
on the LCD.
Run in COOL mode when
room temp. is higher than
temp. setting
Ultra-low air supply
Temp.setting + 2
o
C
Temp. setting
Run in mild DRY mode when
the room temp. reaches temp.
setting +2
o
C
In HEAT operation, after unit is turned on, the air conditioner will send out hot air after a short while in order to
prevent cold draft.
In DRY operation, when the room temperature decreases to 2
o
C above temperature setting, the air conditioner
will run at low fan speed regardless of the fan speed setting.
Unit stop
Press "ON/OFF" key to turn off the unit.
AM
LOW
AUTO
SET TEMP
TIMER
SET
CLOCK
TIME
SLEEP
TEMP
SWING
FAN
SPEED
MODE
9
Hints:
The remote controller could remember the setting conditions in each operation mode. Upon next
time turning on the unit, you need only to press the "ON/OFF" key and the air conditioner will
automatically operate with the previous settings. (Except for the timer, sleep and louver conditions).